Knowledge and advice
Trade fair stand WiFi network: calculating bandwidth for multiple displays
How much bandwidth do you need for multiple displays on a trade fair stand? Calculate it step by step and avoid outages during your presentation.

Trade fair stand WiFi network: calculating bandwidth for multiple displays
You calculate the required WiFi bandwidth for displays at a trade fair stand by multiplying the number of screens by the data use per screen, then adding a buffer of 30–50%. For Full HD video, allow about 10 Mbps per screen; for 4K streaming, about 25 Mbps. With 4 Full HD displays you therefore need at least 40 Mbps — plus a buffer of at least 60 Mbps. Exhibition halls are busy RF environments: a dedicated network and the 5 GHz band are not a luxury but a necessity.
Why exhibition halls are a different story from the office
A trade fair hall is one of the most radio-frequency busy environments you will encounter as an installer. Hundreds of exhibitors, thousands of visitors with smartphones, and dozens of access points compete for the same channels. Telecommunications Agency explicitly points out that at events and trade fairs the radio spectrum becomes heavily loaded and that sufficient network capacity must be arranged in advance.
WiFi is licence-free in the Netherlands on the 2,4 GHz and 5 GHz bands, provided you comply with the transmission power limits. That sounds simple, but it also means you do not have exclusive rights: every other exhibitor shares the same spectrum. On 2,4 GHz only 3 non-overlapping channels available; at 5 GHz there are 36. So always choose 5 GHz for your display network.
Step by step: calculating bandwidth
The calculation consists of four steps.
Step 1 — Determine the content type per screen
| Content type | Bandwidth per screen |
|---|---|
| Static images / slides | 1–3 Mbps |
| Full HD video (played locally, online CMS sync) | 5–10 Mbps |
| Full HD livestream | 10–15 Mbps |
| 4K video (streaming) | 25–40 Mbps |
| Interactive touchscreen application | 5–20 Mbps (depending on data calls) |
Step 2 — Add the total
Multiply the number of screens by the bandwidth per screen. Three Full HD video displays and one interactive touch kiosk: (3 × 10) + (1 × 15) = 45 Mbps.
Step 3 — Add a buffer
Add 25–50% buffer add to your total to absorb peak load and protocol overhead. In the example: 45 × 1,4 = 63 Mbps. Round up: request at least 70 Mbps from the trade fair organiser.
Step 4 — Allow for shared use
Ask the trade fair organiser whether the internet connection is shared with other exhibitors. If so, the actual available bandwidth is lower than the stated maximum. A dedicated line — or a 4G/5G backup — is then advisable.
Network setup: this is how to avoid problems at the stand
Bandwidth is one thing; network setup is another. Even with sufficient Mbps, you can run into problems if the local network is poorly configured.
- Use a dedicated SSID for your displays. Put visitor WiFi on a separate network so it does not take bandwidth from your screens.
- Set up QoS (Quality of Service) on your router or access point. Give video traffic from the displays priority over other data packets. Kinwell describes network segmentation and QoS as the most effective measures for stable business WiFi.
- Choose 5 GHz, channel width 40 or 80 MHz. At 5 GHz, 36 non-overlapping channels are available versus 3 on 2,4 GHz. Less interference, higher throughput.
- Consider a wired connection. Ethernet is more stable than WiFi and completely eliminates RF interference. If the stand construction allows, run a UTP cable to each display.
Local playback versus streaming: the biggest difference
This is where the most underestimated advantage of displays with a built-in media player lies. When content is stored locally on the device — and only the CMS synchronisation runs via WiFi — data usage during the trade fair day is minimal. A content change of a few hundred megabytes takes place at night or early in the morning; during the day the screen barely uses any bandwidth.
All PixioDisplays have an integrated Android computer (Android 13/14). You upload content via USB or via the PixioApp. You do not need a separate media player (elsewhere current price on request per screen) or laptop. At a trade fair stand with limited or shared Wi-Fi, that is a concrete advantage: the displays keep running even without an active internet connection.
For the PixioDisplay Luxe (49" touchscreen, current price on request buy or current price on request p.m. lease) the same principle applies: touch interactions work locally, only lead data or external data feed calls go over the network. That keeps the bandwidth impact manageable, even in a busy exhibition hall.
Concrete example: Summit with 50+ displays
At the Summit event, more than 50 PixioDisplays were deployed at a single location. At that scale, network setup becomes a serious logistical challenge: you need multiple access points spread across the space, each with its own channel configuration to avoid interference. Because the displays play content locally, total network usage remained manageable — the bandwidth peak was in the initial content distribution, not in live playback.
This is the difference with a setup where each screen streams live: with 50 streaming displays you quickly need 500–750 Mbps. With local playback and periodic CMS sync, 50–100 Mbps for the whole network is realistically achievable.
What to do if the exhibition hall does not guarantee bandwidth
Many exhibition halls sell an "internet connection" without guaranteed bandwidth per exhibitor. That is a risk. Three alternatives:
- 4G/5G router as primary or backup connection. A dedicated SIM card with a data bundle gives you your own connection, separate from the trade fair infrastructure.
- Local content on all displays. Load all videos onto the displays in advance. Switch Wi-Fi off if the network is unreliable.
- Wired ethernet via the trade fair organiser. Specifically ask for a wired connection. That is more stable and usually has a higher guaranteed bandwidth than shared WiFi.
For full technical preparation of your trade fair stand — from display selection to content planning — read the complete guide digital signage at trade fairs. If you want to know which displays best suit your stand layout, view the PixioDisplay Luxe or request the price list.
Frequently asked questions
How many Mbps do I need per display on an exhibition stand?
For Full HD video, allow for 5–10 Mbps per screen. For 4K streaming, you need 25–40 Mbps per screen. Add up all screens and add a 30–50% buffer for protocol overhead and peak load.
Can I simply use the trade fair hall's WiFi for my displays?
That is possible, but exhibition halls rarely offer guaranteed bandwidth per exhibitor. The shared network is also busy with hundreds of visitors using smartphones. A dedicated 4G/5G router or wired connection is more reliable.
What is the difference between 2,4 GHz and 5 GHz WiFi for displays at a trade fair?
At 2,4 GHz there are only 3 non-overlapping channels available; at 5 GHz there are 36. In a busy exhibition hall, 5 GHz is almost always the better choice: less interference from other networks and higher maximum throughput.
Do I need a WiFi permit for my trade fair stand?
No. WiFi on 2,4 GHz and 5 GHz is licence-free in the Netherlands, both privately and commercially, provided you comply with the transmit power limits (2,4 GHz: max 100 mW; 5 GHz indoor: max 600 mW). Check whether your equipment has the CE mark — this confirms it complies with European requirements.
What if the displays play content locally — do I then need less bandwidth?
Yes, considerably less. With local playback, a display uses hardly any bandwidth during the trade fair day; only the CMS synchronisation goes over the network. You can schedule that synchronisation outside opening hours. This makes a stable presentation possible, even on an unreliable trade fair network.