Knowledge and advice
Outdoor displays at events: weather resistance and placement
Which outdoor display will survive a festival or outdoor trade fair? Learn everything about IP classes, brightness, placement and permits — and choose the right screen.

Outdoor displays at events: weather resistance and placement
An outdoor display at a festival, outdoor fair or market must do three things at once: remain visible in bright sunlight, withstand rain and stay stable in a busy area. That places different demands on it than an indoor display. The minimum requirement: IP65 protection against dust and water jets, a brightness of at least 2.500 cd/m² and a stable base or mounting that can withstand wind. Anyone compromising on these three points risks failure at the very moment it matters most.
IP rating: the basis of weather resistance
IP stands for Ingress Protection and is laid down in the international standard IEC 60529. The first digit indicates dust tightness, the second water resistance. For outdoor events, IP65 is the minimum starting point.
IP65 is completely dust-tight and resistant to water jets from all directions — including a Dutch rain shower. IP54, sometimes sold as 'semi-outdoor', only protects against splashing water and is suitable only for covered locations such as a canopy or tent entrance. If you choose a market location or festival site with a risk of intensive cleaning, IP66 or IP67 is more sensible.
An important caveat: some manufacturers only state an IP class for the front of the screen, while the housing offers lower protection. If in doubt, always request the full test report based on IEC 60529. In addition, always combine the IP class with the thermal specifications: an IP65 display can still overheat at an ambient temperature of 45°C if it does not have active cooling.
Quick overview of IP classes for events:
| IP rating | Protection | Suitable for |
|---|---|---|
| IP54 | Dustproof, splashproof | Covered entrance, canopy |
| IP65 | Fully dustproof, water jets | Open festival site, market |
| IP66 | Dustproof, powerful water jets | Intensive cleaning, harbour |
| IP67 | Dust-tight, immersion up to 1 m | Flood risk, quayside |
Brightness: how many nits do you need outdoors?
Brightness is the most underrated spec for outdoor displays. Standard office screens deliver 250 to 400 nits — outdoors they are completely unreadable. Outside, a display competes with daylight, which on a sunny day can reach 100.000 lux on the screen surface.
An outdoor display needs at least 2.500 nits to be visible during the day. In direct sunlight — on a south-facing facade or open square — 5.000 nits is the practical lower limit. For a sheltered position under a tent or on the north side of a stand, 2.500–3.500 nits is sufficient. If the screen stands freely on a sunny festival site, allow for at least 3.500 nits.
The PixioDisplay Outdoor delivers 3.500 cd/m² and is available in 49″ (current price on request) and 55″ (current price on request) — price list Q2 2026. That makes it suitable for freestanding positions at outdoor events where competing consumer screens fall short. If you have a sheltered location with a power problem, then the PixioDisplay A-board an alternative: it runs on a battery with a runtime of 14–18 hours and reaches 1.500 or 2.000 nits (current price on request respectively current price on request, price list Q2 2026). That is sufficient for shaded locations or overcast days, but not for direct sunlight.
Anti-reflective coating or toughened anti-glare glass reduces mirror reflections and makes the screen easier to read at lower nits. Pay attention to this when comparing products.
Installation: viewing angle, stability and power
The right position determines whether your display is read or ignored. Three practical rules:
1. Viewing angle for passers-by
Place the screen at right angles to the main flow of visitors. A display rotated 45° effectively loses brightness for anyone not standing directly in front of it. Choose a viewing angle of at least 160° horizontally.
2. Stability in wind
A free-standing display of 55″ has a considerable wind area. Always use the supplied weighted base or anchor the screen to an exhibition stand or structure. Check the wind-load specifications in the technical datasheet — especially for multi-day outdoor events.
3. Power supply
Many festival grounds and outdoor trade fairs have limited power connections. The PixioDisplay A-board solves this with its integrated battery (14–18 hours' runtime, no power socket needed). For displays that do require power, plan the cable route in advance: loose cables across walkways are a safety risk and a trip hazard.
At Summit, more than 50 PixioDisplays were deployed at a single event — a scale at which power planning and cable management are just as important as the screen choice itself. See the Summit reference page for the approach.
Permits: what you need to arrange before the event
A digital display visible from the public highway falls under the Environmental Act in the Netherlands. For advertising on or at a location, you usually need an environmental permit. Temporary advertising at events is often subject to more lenient rules, but the municipality decides. An environmental permit is required if the advertising expressions are visible from the public highway. You may not place temporary advertising earlier than 4 weeks before your activity and it must be removed as soon as possible after the event.
Carry out the permit check via the Environment and Planning Portal before you order or hire a display. Municipalities have their own policy rules; what is permitted in Utrecht may require different procedures in Antwerp or Ghent. In Belgium, a similar local competence applies via the planning permission.
In some municipalities you pay an advertising tax if the advertising is visible from the public highway — for example for advertising boards or light boxes. Precariobelasting applies to advertising on or above municipal land. Factor this into your event budget.
Buying or renting: the arithmetic break-even point
The question customers ask us most often: buy or rent? The mathematical break-even point is around 8–10 use days per year. If you use an outdoor display more often than that, buying pays for itself. If you only go to one or two events a year, renting is financially wiser.
Via display-huren.nl you rent the PixioDisplay Sidewalk Sign or Outdoor for short-term events without the investment of purchase. All PixioDisplays have an integrated Android computer (Android 13/14) — no separate media player or laptop required. That saves considerable set-up time and cabling on a busy event site.
If you want to know which screen size suits your stand area and visitor numbers, then read Which display size should you choose for maximum impact at a trade fair? for concrete guidelines per situation.
Frequently asked questions
What IP rating do I minimally need for an outdoor display at a festival?
IP65 is the minimum for an open outdoor location. This fully protects the screen against dust and water jets from all directions, including heavy rain. If the display is in a location where intensive cleaning takes place or where there is a risk of flooding, choose IP66 or IP67.
How many nits does a display need to be readable outdoors?
In a sheltered position (tent, north side), 2.500–3.500 nits is sufficient. In direct sunlight at an open festival site, you need at least 3.500 nits; 5.000 nits is the safe choice for the brightest conditions. Standard consumer screens (250–400 nits) are completely unreadable outdoors during the day.
Do I need a permit for a temporary outdoor display at an event?
In most cases, yes, if the display is visible from the public road. Always carry out the permit check first via the Omgevingsloket (omgevingsloket.nl). Temporary advertising may usually not be placed earlier than 4 weeks before the event and must then be removed immediately. Rules differ by municipality.
Can I use an outdoor display without a power connection on the event site?
Yes, the PixioDisplay Pavement Sign runs on an integrated battery with an operating time of 14 to 18 hours — no power socket needed. This model is available in a 1.500-nit (€ 2.245) and a 2.000-nit variant (€ 2.950), price list Q2 2026. For direct sunlight situations, the 2.000-nit version is recommended.
Is renting or buying more economical for an outdoor display for a one-off event?
The tipping point is around 8–10 days of use per year. If you use the screen less often, renting is financially more sensible. Via the Pixio Display rental page, you can rent an outdoor display per day, without the purchase costs of a permanent model.