Knowledge and advice
Controlling video on a trade fair stand: technical setup step by step
How do you run video at a trade fair stand? Read the full technical setup: hardware, file formats, cabling and content management for flawless playback.

Controlling video on a trade fair stand: technical setup step by step
Controlling video on a trade fair stand means connecting a display with a built-in or external media player to your video content, setting the correct playback mode and making sure the system runs faultlessly for the entire duration of the trade fair. The three critical variables are the hardware (display + player), the file format and the power source at the event location. Anyone who aligns those three properly has nothing left to do on the day itself.
Step 1: choose the right hardware for your setup
The first choice is whether you use a display with an integrated media player or a separate combination of TV + laptop or external media player. That choice determines how much you need to install on the stand floor.
All PixioDisplays run on an integrated Android computer (Android 13/14). As a result, you do not need a separate media player (elsewhere current price on request per screen) or laptop. That saves an HDMI cable, an extra power circuit and the chance of a 'no signal' message at the wrong moment.
A separate TV + laptop is more flexible for last-minute changes, but requires more cabling and an extra socket. Only choose that route if you want to be able to change the content right up to the trade fair day via the laptop itself.
For a trade fair stand with one central screen, the PixioDisplay Luxe (49″ touchscreen, 67×185 cm, current price on request buy or current price on request p.m. lease) a solid starting point. Want to hire? That is possible from current price on request per day (1 day, 49") or current price on request per day at 3 days — see the rental page for the current day rates (price list Q2 2026).
Step 2: prepare your video content
The file format determines whether your video plays smoothly or freezes on the first loop. Use MP4 with H.264 encoding as the standard: this format is recognised flawlessly by almost all commercial displays and Android players.
Please take the following specifications into account:
- Resolution: 1920×1080 (Full HD) for portrait or landscape setup; 3840×2160 (4K) only if the display can handle it
- Bitrate: 8–15 Mbps for Full HD, up to 40 Mbps for 4K
- Audio channels: stereo (2.0) or no audio — surround coding can cause problems on built-in speakers
- File name: no spaces or special characters; use letters, numbers and hyphens only
- Loop setting: set the playlist to repeat indefinitely before you go to the trade fair
Always test the video on the exact display you will use, not on a consumer TV at home. Consumer televisions run at around ±300 nits and are not designed for continuous use; commercial displays are.
Step 3: choose your playback method
There are three common methods for playing video at a trade fair stand. Each method has a different dependency.
| Method | Benefit | Risk |
|---|---|---|
| USB stick in display | No internet required, quick to switch | Stick forgotten or damaged |
| Website URL (online stream) | Always up-to-date content | Depending on trade fair network |
| PixioApp (Android management) | Remote management, scheduled content | Requires stable Wi-Fi or 4G |
For trade fairs, USB is the most reliable method. Trade fair venues such as Jaarbeurs Utrecht or RAI Amsterdam do not usually provide guaranteed internet speed per stand. Always provide a USB backup, even if you mainly work via the app.
Fully charge the USB stick at home first, test the loop and stick a label on the stick with the file name and version date. That prevents confusion if you have several sticks with you.
Step 4: cabling and power plan
A trade fair stand is usually assigned one or two power circuits. Plan your power consumption before the build day.
A 43–55" display uses an average of 80–150 watts. With three screens on one 16A group (3.680W), there is room, but also factor in the lighting and other equipment. Ask the trade fair organiser to request the available amps per group — this is stated in the venue's technical handbook.
Practical cabling tips:
- Use cable ducts or tape to guide cables along the stand wall; loose cables are a trip hazard and are rejected by stand inspections
- Use a power strip with surge protection, not a standard extension lead
- Keep a spare cable (HDMI and power cable) to hand in the setup bag
- Set the display to restart automatically after a power failure — after a brief outage on the trade show floor, the screen will then restart itself
Don't have a power socket at the desired position? The PixioDisplay Pavement Sign (43", on battery, 14–18 hours' use) works completely without a power circuit. Price: current price on request (1.500 nits) or current price on request (2.000 nits) — price list Q2 2026.
Step 5: test before the trade fair, not at it
The most common mistake is switching on the display for the first time on the assembly day. Do the full test at least 48 hours before departure.
Go through this checklist:
- Video plays in a loop without a black screen between repeats
- Sound is at the correct level (or off, if audio is not desired)
- Display starts automatically after power off/on
- Brightness is set to maximum or trade fair stand level
- USB stick fits securely in the port and is locked with a cable tie or tape
- Backup copy of the video is on a second USB stick
At Summit, more than 50 PixioDisplays were used at one event. The logistical success of such a setup depends on one thing: every screen was preconfigured and tested, so on-site assembly was just a matter of putting it in place and connecting it.
From setup to complete trade fair strategy
A well-functioning video setup is the technical foundation. What you do next with the attention you attract — capturing leads, measuring KPIs, activating visitors — determines the real result of your trade fair participation.
For that, read the pillar of this cluster: Digital signage at trade fairs: the complete guide to a standout stand. This guide covers the full strategy, from stand design to content planning and follow-up.
Frequently asked questions
Which video format works best on a trade fair stand display?
MP4 with H.264 encoding is the safest choice. This format is supported by virtually all commercial displays and Android media players. Use Full HD (1920×1080) at a bitrate of 8–15 Mbps and avoid special characters in the file name.
Do I need internet to play video on my exhibition stand?
No. Video plays fully offline via a USB stick. That is the most reliable method at trade fairs, because exhibition venues do not provide guaranteed internet speed per stand. Always make sure you have a USB backup, even if you primarily work via an app or URL.
How much power does a display on a trade fair stand use?
A 43–55" commercial display consumes on average 80–150 watts. With three screens on one 16A circuit, there is technically room, but allow for lighting and other equipment as well. Ask the trade fair organiser in advance for the venue's technical manual.
What is the difference between a commercial display and an ordinary TV on a trade fair stand?
Consumer TVs are designed for 4–6 hours of use per day at approximately 300 nits brightness. Commercial displays are built for continuous use and reach 400–3.500 nits depending on the model. On a trade fair floor with lots of ambient light, that brightness is the difference between visible and invisible.
Buy or hire for a one-off trade fair?
The arithmetic break-even point is around 8–10 usage days per year. If you go to a trade fair once or twice a year, renting is financially more advantageous. The PixioDisplay Mobile (43") can, for example, be rented from €105 per day at 3 days (price list Q2 2026).