Knowledge and advice
Trade fair stand digital signage: regulations and safety in NL/BE
Electrical supply, fire safety and GDPR for digital signage on a trade fair stand in the Netherlands and Belgium: what are the rules and how do you comply?

Trade fair stand digital signage: regulations and safety in NL/BE
Digital signage at a trade fair stand is more than putting up and connecting a screen. In the Netherlands and Belgium, specific requirements apply for electrical installations, fire safety and — for interactive or data-collecting screens — the GDPR. Anyone who knows those rules before the build day avoids rejection by the trade fair organiser or fire brigade and does not take on unnecessary liability.
Electrical installations: NEN 1010 (NL) and AREI (BE)
In the Netherlands, the safety requirements for low-voltage installations are set out in NEN 1010. The Building Decree explicitly refers to this standard; anyone who complies with it has the legal presumption of conformity. For day-to-day operations and periodic inspection, there is additionally NEN 3140, which stems from the Working Conditions Act.
In Belgium, the equivalent is the AREI (General Regulation on Electrical Installations), issued by the FPS Economy. Temporary installations — including trade fair setups — fall explicitly under the AREI and must be inspected annually by an External Service for Technical Control (EDTC). A positive inspection report must be submitted to the fire brigade before use.
Translated into practical terms for a trade fair stand with displays:
- Use only equipment with a valid CE mark.
- Fully unwind extension leads — coiled cables can overheat.
- Do not use extension leads in series; connect to the distribution board designated by the trade fair organiser.
- If in doubt, ask the exhibition hall for an overview of available groups and maximum load per connection.
Fire safety: what the exhibition hall and fire brigade check
Trade fair organisers apply their own fire safety regulations, based on national laws and regulations. In Belgium, each emergency response zone draws up its own events regulations; always consult the regulations of the local zone where the fair takes place.
The fire service pays attention to the following at a trade fair stand:
- Clear escape routes (minimum 2 metres wide, depending on location).
- Fire extinguisher present and inspected within the required period.
- Stand material with a fire classification certificate (often at least class B or C-s2,d0 in accordance with EN 13501).
- Electrical equipment at a sufficient distance from combustible material.
A digital screen that is on continuously generates heat. Commercial displays are designed for continuous use; consumer TVs (around 300 nits) are not and can overheat during prolonged operation. This is something fire inspectors are checking more and more often.
GDPR/AVG for interactive and data-collecting screens
A passive advertising screen does not collect personal data and falls outside the GDPR. As soon as you use touchscreens, lead forms, QR links or camera analytics, that changes.
Key rules at a glance:
- Lead forms on touchscreens: you are the data controller. Inform visitors about the purpose, retention period and their rights (access, rectification, erasure). Record consent.
- Facial recognition or biometric analysis: in principle prohibited under the GDPR. The Dutch Data Protection Authority (NL) and the Belgian Data Protection Authority (BE) only allow this with explicit consent and a compelling interest — an exhibition stand does not qualify.
- Anonymous visitor count (for example motion sensors without facial recognition): no personal data, no GDPR obligation.
- Fines: the AP can impose fines of up to 20 million euros or 4% of worldwide annual turnover for infringements.
If you opt for an interactive screen with lead capture, make sure your privacy statement is available on the screen itself or via a QR code. Read more about compliant lead handling in the article How do you capture leads at a trade fair (and how do you process them).
Battery screens: a practical alternative where power supply is limited
Not every trade show stand has direct access to a sufficiently sized power connection. A battery-powered screen bypasses that problem — but brings its own points to consider.
The PixioDisplay Sidewalk Sign (43") runs on a built-in battery with 14 to 18 hours of battery life and does not need a power outlet (price list Q2 2026: current price on request for the 1.500 nits version, current price on request for 2.000 nits). That makes it suitable for stands where the trade fair organiser limits the power connection or charges separately for it.
When it comes to battery-powered screens, pay attention to:
- Check whether the exhibition hall allows battery-powered equipment (lithium batteries are sometimes restricted because of fire risk).
- Fully charge the battery before the build day.
- Keep spare charging cables on the stand itself.
Practical example: bol.com at the Nine Months Fair
Pixio Display provided the screens for bol.com’s stand at the Negenmaandenbeurs (reference). A fair for expectant parents places high demands on safety and appearance: busy stands, many visitors moving around and an organiser that strictly monitors fire safety and tidy cable management. The displays were supplied with an integrated Android computer — no separate laptop or media player needed — which kept the cable set on the stand to a minimum and reduced the risk of tripping.
This illustrates a broader principle: the less separate hardware there is, the easier the safety check by the trade fair organiser.
Practical checklist before the build day
| Subject | Netherlands | Belgium |
|---|---|---|
| Electrical installation standard | NEN 1010 / NEN 3140 | AREI (FPS Economy) |
| Inspection requirement for temporary setup | Recommended; exhibition hall requirement | Mandatory via EDTC; report to fire service |
| CE marking equipment | Mandatory | Mandatory |
| Fire class stand material | In accordance with trade fair regulations | In accordance with the zonal events regulation |
| GDPR for touchscreen/lead capture | Processing register + consent | Same (GDPR applies EU-wide) |
| Facial recognition | Prohibited unless there is an explicit exception | Prohibited unless there is an explicit exception |
Always request the technical regulations from the trade fair organiser. That document contains the specific requirements for power connections, cable ducts, maximum stand height and fire classes — and takes precedence over general standards.
For the full approach to digital signage at trade fairs — from screen choice to content planning — read the pillar Digital signage at trade fairs: the complete guide to a standout stand.
Frequently asked questions
Do I need to request an electrical inspection for my trade fair stand?
In Belgium, inspection by an External Service for Technical Control (EDTC) is mandatory for temporary electrical installations; the positive inspection report must be sent to the fire brigade before use. In the Netherlands, formal inspection is not always legally required for a temporary stand, but trade fair organisers may require it contractually. Request the technical regulations from the exhibition hall.
Can I use a regular consumer TV as an exhibition screen?
Technically it is allowed, but it is not advisable. Consumer TVs are not designed for continuous use and have a brightness of around 300 nits — too low for a busy exhibition hall. In addition, prolonged use can cause overheating, which creates a fire safety risk that trade fair organisers and fire services are checking more and more often.
What do I need to arrange if I collect leads via a touchscreen on my stand?
You are the data controller under the GDPR. That means: inform visitors about the purpose and retention period of their data, record consent in a demonstrable way and ensure your privacy notice is available on or by the screen. Store data securely and delete it once the purpose has been achieved.
Is facial recognition via a trade fair screen allowed?
No, in principle not. Both the Dutch Data Protection Authority and the Belgian Data Protection Authority consider facial recognition to be the processing of special personal data. This is prohibited unless a statutory exception applies — and for a commercial trade fair stand that is almost never the case. Anonymous motion or visitor counting without facial recognition falls outside the GDPR.
What is the difference between NEN 1010 and NEN 3140 for my stand?
NEN 1010 covers the design and installation of electrical systems; NEN 3140 governs the safe use and periodic inspection of existing installations. For a temporary trade fair stand, NEN 1010 is relevant if new connections are installed, and NEN 3140 if employees work on or near the electrical installation.