Knowledge and advice
What are nits? Explaining display brightness
Nits and cd/m² express the same screen specification. Read how to compare that value with reflection, viewing distance and placement.

One nit is one candela per square metre
Screen luminance is often stated in nits. One nit corresponds to one candela per square metre, abbreviated cd/m². In a datasheet, 500 nits and 500 cd/m² are therefore the same numerical value. The measurement describes light emitted by the screen surface in a particular direction. It is not a measure of the amount of light in the room, nor a complete description of how a visitor experiences the image.
More luminance is not the same as a consistent experience
A screen with a stated value of 1.000 cd/m² has, using a comparable measurement method, higher luminance than a screen of 500 cd/m². That does not mean every viewer experiences the image as exactly twice as bright or readable. Eyes adapt to the surroundings and reflection can hide information. Contrast, font size, viewing direction and the content used affect what you actually see. So compare the specification together with a practical test.
Keeping nits, lux and contrast apart
Lux describes light falling on a surface. A light meter in a shop window therefore measures something different from the luminance shown in the screen datasheet. Contrast is about the ratio between light and dark areas; a high stated contrast does not automatically make a reflective placement suitable. There is no general lux-to-nits formula that chooses the right screen without data about the setup. Therefore give a supplier information about sun, lighting and viewing position.
Typical, maximum and peak
Manufacturers may quote different brightness values. Check whether a value is achieved under normal conditions or whether it is a maximum or temporary peak. Where possible, compare the same type of value and ask what is available during the intended operating time. Also look at ambient temperature, cooling and any dimming. A higher maximum figure is not proof that a screen will last longer. Lifespan, operating time and warranty are separate pieces of information that you must check separately.
Screen size and placement remain important
A larger screen is not automatically brighter per square metre. It can, however, allow larger text or a greater viewing distance. So first determine where visitors stand and what they need to read. A display behind glass can have a lot of reflections, while the same model on a shaded indoor wall may be perfectly usable. For a sunny shop window or an exposed outdoor position, the complete configuration must fit, including heat dissipation, mounting and any weather protection.
Which data do you compare in a quote?
Compare screen size, resolution, stated luminance, brightness value type, service life, temperature limits and mounting side by side. Show your own content at the intended distance and assess light incidence at several times. For a shop window, ask for a suitable Window model and for genuine outdoor placement to the outdoor version. Use nits as a concrete product specification; the right number follows from the location and not from one general application table.
Sources and further information
Frequently asked questions
Are nits and cd/m² the same number?
Yes. One nit equals one candela per square metre.
Does a screen with more nits automatically last longer?
No. Luminance, operating time, lifespan and warranty are separate specifications.