Knowledge and advice
Digital signage power consumption: calculate monthly costs
Calculate how much a digital signage display costs per month in electricity. With Dutch kWh rates, formula and comparison table by screen type and usage duration.

Digital signage power consumption: calculate monthly costs
A commercial digital signage display of 43–49 inches typically uses 100–150 watts. With a daily use of 12 hours and the current Dutch electricity tariff of around current price on request per kWh, that comes to current price on request per screen per month. Outdoor displays with high brightness (3.000–3.500 nits) consume significantly more. Below you will find the formula, a comparison table and practical saving tips.
The basic formula: how to calculate the monthly costs
The calculation consists of three steps:
- Power (W) → kWh/day: watts ÷ 1.000 × hours of use per day
- kWh/day → kWh/month: × 30
- kWh/month → cost: × your kWh tariff
Example: a 43-inch display of 120 watts, 12 hours per day on:
0,120 kW × 12 hours × 30 days = 43,2 kWh/month
43,2 × current price on request = current price on request per month
The Dutch electricity rate in fixed contracts currently lies between current price on request and current price on request per kWh (including energy tax and VAT). For a business estimate, use current price on request per kWh as a realistic midpoint.
Power consumption per screen type and size
Not every display draws the same amount of power. Brightness is the biggest variable: a screen at maximum brightness (500 cd/m²) uses up to 40% more energy than on standard settings. Outdoor displays with 3.000–3.500 nits therefore consume structurally more than indoor models.
| Screen type | Size | Typical power consumption | kWh/month (12 h/day) | Cost/month (current price on request/kWh) |
|---|---|---|---|---|
| Indoor display (±400 cd/m²) | 32″ | 50–70 W | 18–25 kWh | current price on request |
| Indoor display (±400 cd/m²) | 43–49″ | 100–150 W | 36–54 kWh | current price on request |
| Shop window display (1.000 nits) | 43″ | 150–200 W | 54–72 kWh | current price on request |
| High-bright outdoor (3.000+ nits) | 43–55″ | 250–400 W | 90–144 kWh | current price on request |
| Battery display (no mains power) | 43″ | n/a | 0 kWh (battery) | current price on request,– mains power |
Power based on common specifications for commercial displays; always consult the datasheet of your specific model.
At the PixioDisplay Outdoor (3.500 cd/m², 49–55 inch, prices current price on request excl. VAT, price list Q2 2026) you should expect the upper segment in the table above. That is a deliberate choice: the high brightness is necessary for readability in direct sunlight, and the additional power cost is usually small compared with the total operating costs.
Which factors really determine consumption?
Four variables have the greatest impact:
- Brightness (nits): higher nits = more backlight power. A screen at maximum brightness uses up to 40% more than on standard settings.
- Service life: a display running 16 hours a day consumes twice as much as a display on for 8 hour. Schedule it as tightly as possible.
- Integrated computer vs separate media player: a display with a built-in Android computer (as all PixioDisplays have) draws 10–25 watts extra, but eliminates a separate media player of current price on request that also uses power. On balance, the integrated solution is cheaper and simpler.
- Ambient temperature: displays in warm environments (shop windows, outdoor) work the cooling harder. Power consumption can therefore be 12–18% higher than in a climate-controlled space.
Battery-powered displays: zero mains power, but not free
A special category is the battery-powered display. The PixioDisplay A-board (43 inch, 14–18 hours run time per charge, current price on request excluding VAT, price list Q2 2026) does not need a mains socket. The mains electricity costs are therefore current price on request,– per month. You do pay for charging the battery, but in practice this is offset by the installation saving: no electrical work, no cable trunking, no landlord approval.
For temporary installations or locations without a mains socket, this is the most cost-efficient choice. For permanent installations at a fixed location with mains power, a standard display is cheaper to buy.
Monthly costs in the total operating calculation
Energy is rarely the biggest cost item. Put the monthly electricity costs alongside the other operating costs:
| Cost item | Indicative per month (1 screen) |
|---|---|
| Hardware (lease, 60 mths) | current price on request |
| Software licence | current price on request |
| Power consumption (indoors, 12 h/day) | current price on request |
| Power consumption (outdoor, 12 h/day) | current price on request |
| Maintenance / warranty extension | current price on request |
Lease amounts based on PixioDisplay Mobile (current price on request p.m.) up to PixioDisplay Luxe (current price on request p.m.), price list Q2 2026. See also digital signage licences and software costs for a full overview of the software component.
The electricity costs for an indoor setup are roughly 10–20% of the total monthly operating costs. That is relevant, but not a reason to choose a cheaper and less bright screen: a display that cannot be read has no value.
Four ways to reduce consumption
- Set a schedule: set the display to switch off automatically outside opening hours. Going from 8 hours to 12 hour per day halves the electricity bill.
- Reduce brightness during the day: indoor spaces rarely need more than 400 cd/m². Higher brightness increases consumption without visible benefit.
- Choose an integrated Android display: no separate media player means one less device drawing 24/7 power.
- Use a battery-powered display for locations without mains power: avoids installation costs and mains power consumption at the same time.
If you want to calculate the full cost structure of a digital signage installation — including hardware, software and installation — read digital signage vs. traditional posters: cost comparison and impact.
Frequently asked questions
How much power does a 43 inch digital signage display use per month?
A 43-inch commercial display typically consumes 100–150 watts. At 12 hours of use per day and 30 days per month, that is 36–54 kWh. At the Dutch electricity tariff of around €0,24–€0,26 per kWh, that costs €9 to €14 per month.
What is the difference in power consumption between an indoor and an outdoor display?
Outdoor displays with 3.000–3.500 nits consume two to three times as much as indoor models with 400 nits. At 12 hours per day, an outdoor display costs €23–€36 per month in electricity, an indoor model €5–€14. The higher brightness is necessary for readability in direct sunlight.
Does an integrated media player affect power consumption?
Yes. A built-in computer (such as Android 13/14 in PixioDisplays) adds 10–25 watts to the base consumption. But it also removes a separate media player that draws 24/7 power. On balance, the total energy bill is comparable or lower, and you have one less device to manage.
How do I calculate the electricity costs of my digital signage network of 10 screens?
Multiply the consumption of one screen (in kWh/month) by the number of screens. Example: 10 × 43 kWh = 430 kWh/month × €0,25 = €107,50 per month for the whole network. Adjust the schedule (fewer hours on) to save immediately.
Is a battery-powered display cheaper to run than a mains-powered display?
As for mains power: yes, the costs are €0,–. But the purchase price is higher (PixioDisplay Pavement Board from €2.245, price list Q2 2026) and you need to charge the battery regularly. The saving is mainly in installation: no electrical work, no cable duct, no reliance on a power socket.