Knowledge and advice
Video compression for exhibition stand displays: bandwidth and quality
H.264 or H.265, which bitrate for 1080p or 4K? Practical guide for installers who want to play video flawlessly on exhibition stand displays.

Video compression for exhibition stand displays: bandwidth and quality
Video compression determines how much data a display has to process per second to show smooth images. On a trade fair stand, two variables play the main role: the codec (H.264 or H.265) and the bitrate (expressed in Mbps). Choose the wrong combination and you get blockiness, stuttering or a black screen — exactly when visitors walk past. This article gives you the technical framework to avoid that.
Choose codec: H.264 or H.265?
H.264 (AVC) is the most widely used video compression standard and is supported by virtually every device and platform. H.265 (HEVC) is its successor: it delivers the same image quality at around 25–50% lower bitrate. That sounds attractive, but there is a downside.
H.265 requires more processing power to decode. Older Android media players and budget displays may not play H.265 smoothly without hardware acceleration. H.264 is less demanding and runs stably on a wide range of hardware — including the integrated Android computers in PixioDisplays.
Rule of thumb: use H.264 if you are unsure which hardware the customer has. Choose H.265 only if the display explicitly supports hardware HEVC decoding and bandwidth is scarce.
Bitrate per resolution: concrete figures
Bitrate is the amount of data processed per second. A high bitrate prevents compression errors such as blockiness and ensures smooth playback of complex scenes; a bitrate that is too low makes images grainy or blurry.
Below are the practical bandwidth guidelines for trade fair stand displays:
| Resolution | Codec | Minimum bitrate | Recommended bitrate |
|---|---|---|---|
| 1080p (Full HD) | H.264 | 6 Mbps | 8–12 Mbps |
| 1080p (Full HD) | H.265 | 4 Mbps | 5–8 Mbps |
| 4K (UHD) | H.264 | 20 Mbps | 30–35 Mbps |
| 4K (UHD) | H.265 | 10 Mbps | 15–20 Mbps |
For trade fair video with lots of motion — product demos, animations, slow-motion footage — choose the upper end of the recommended range. Fast-moving content with a lot of motion needs higher bitrates to prevent artefacts. A static product photo with subtle animation can work perfectly well with the lower limit.
Local storage versus streaming: what works at a trade fair?
On an exhibition hall, Wi-Fi is notoriously unreliable. Dozens of exhibitors, thousands of visitors with smartphones and shared networks cause congestion. On an overcrowded WiFi network, a streaming service drastically reduces the bitrate, causing colours to look flat and sharpness to disappear — even if the display indicates it is receiving a 4K signal.
The solution is simple: store video locally. Load the compressed files onto the display before the trade fair via USB or the PixioApp. That way playback is completely independent of the network. Reserve streaming for dynamic content that must be updated live, such as price boards or live feeds — and preferably via a wired connection or your own 4G/5G router.
PixioDisplays have an integrated Android computer (Android 13/14) with built-in storage. You do not need a separate media player — elsewhere such a device costs current price on request per screen. Loading content via USB takes minutes and the display then plays completely independently.
VBR or CBR: which bitrate mode should you choose?
For local playback on a trade fair stand, VBR is the better choice: quiet scenes use less data, active scenes automatically get more bits. The file is smaller and the quality is more consistent. Use CBR when the playback hardware struggles with variable data streams — which is rarely the case with modern Android displays.
Practical advice: export your trade fair video in H.264, VBR, with an average bitrate of 8 Mbps and a peak bitrate of 16 Mbps for 1080p. That gives a file of about 3,6 GB per hour — well within the storage capacity of most displays.
File format and container format
The codec (H.264 or H.265) and the container format are two different things. MP4 is the most compatible container format for digital signage: it is supported by Android, Windows and almost all media players. MOV works in Apple ecosystems but can sometimes cause issues on Android hardware.
Always use:
- Container: MP4 (.mp4)
- Video codec: H.264 (AVC) or H.265 (HEVC)
- Audio codec: AAC, 192 kbps (or no audio if the display is silent)
- Frame rate: 25 fps (PAL standard in the Netherlands and Belgium) or 30 fps
- Colour space: BT.709 (standard for HD displays)
Avoid ProRes, DNxHD or other editing formats. These are intended for the edit suite, not for playback on a display. They have bitrates of 100+ Mbps and require significantly more processing power.
Practice example: Summit with 50+ displays
During the Summit event more than 50 PixioDisplays used at one location. At that scale, a coordinated content strategy is essential. All displays played locally stored video in H.264/MP4 — no central streaming server, no dependence on the hall’s Wi-Fi. Each display operated autonomously. That is exactly why local storage is preferable to streaming at trade shows.
Want to know which display model best suits your trade fair setup? Then view the PixioDisplay Luxe (49″ touchscreen, current price on request) or the other models on the trade fair and event displays page. For temporary use, rental is also an option: the PixioDisplay Mobile (43″, 400 cd/m²) is available from current price on request per day with three days' rental (price list Q2 2026).
For the full technical setup of video on a trade fair stand — from signal distribution to content scheduling — read the article Controlling video on a trade fair stand: technical setup step by step.
Frequently asked questions
Which codec is best to use for video on an exhibition stand display?
H.264 is the safest choice: it is supported by virtually all displays and media players, including Android hardware. H.265 offers the same quality at a lower bitrate, but requires hardware decoding. Always check whether the display supports HEVC hardware decoding before using H.265.
How many Mbps do I need for smooth 1080p video on a trade show screen?
For 1080p Full HD in H.264, 8 to 12 Mbps is recommended. With lots of movement in the image — product demos or animations — choose the upper limit. With calm content, 6 Mbps is sufficient. With H.265 you can achieve the same quality at 5 to 8 Mbps.
Is streaming or local storage better for displays at a trade fair?
Local storage is strongly preferred at a trade fair. Trade fair Wi-Fi is often overloaded by dozens of exhibitors and thousands of visitors. Locally stored video always plays smoothly, regardless of network quality. Load your files onto the display before the fair via USB or the management app.
What is the difference between VBR and CBR for trade fair stand video?
VBR (variable bitrate) adjusts the bitrate per scene: still images use less data, active scenes get more bits. That gives a smaller file size with consistent quality. CBR (constant bitrate) is more fixed and simpler, but less efficient. For local playback on modern displays, VBR is the better choice.
Which file format works best on digital signage displays?
MP4 with H.264 video codec and AAC audio is the most compatible format for digital signage on Android hardware. Avoid editing formats such as ProRes or DNxHD: these have bitrates of 100+ Mbps and are not intended for playback on a display.