All-in-one touchscreen displays with Android.

Knowledge and advice

Digital signage at events: setup, risks and control

Technical preparation, safety rules and contractual arrangements for digital signage at trade fairs and events. Practical guide for exhibitors.

Stand holder checks digital signage display at trade fair stand during build-up in exhibition hall

Digital signage at events: setup, risks and control protocols

Digital signage at a trade fair or event is a temporary installation that falls under specific electrical standards, location rules and contractual responsibilities. An exhibitor who underestimates this risks failure on the trade fair floor, rejection by the hall, or liability for damage. Good preparation starts at least four to six weeks before opening day and includes three layers: technical setup, risk management and contractual checks.

Technical setup: power, mounting and brightness

Each trade fair venue has its own rules regarding stand height, materials, fire safety and electrical connections. Request the technical regulations as soon as you confirm your stand location. Large halls such as Jaarbeurs Utrecht and RAI Amsterdam are each approximately 100.000 m² in size — in such environments, stricter technical requirements apply than at smaller venues.

Calculate your power consumption before setup day. Add up the wattage of all devices that will be used at the same time and include a safety margin of 20 to 30 per cent, so you are not operating right at the limit of capacity. A 43" display typically uses 80–120 watts; a touchscreen kiosk a little more. That is well within a standard 16A floor socket, but if you combine several screens with lighting and laptops, it adds up quickly.

For temporary electrical installations at events in the Netherlands NEN 1010 (electrical low-voltage installations) and NEN 3140 (safe working on electrical installations). Specifically for events, there is also NEN 8020-20, the standard for temporary electrical installations at events. This standard applies regardless of whether an event lasts hours, days or months, and makes no distinction in visitor numbers. For cables on walkways, lay them in cable ducts or protect them with cable bridges — this is both a safety requirement and a practical obligation that many halls record contractually.

Brightness is the second technical variable that exhibitors underestimate. Inside an exhibition hall, a screen of ±400 cd/m² is sufficient. If your stand is by a glass facade or in a brightly lit entrance hall, you need at least 1.000 nits to maintain contrast. Consumer TVs typically only reach ±300 nits and are not designed for continuous use — they fall outside the warranty conditions of most rental contracts.

Risks on the exhibition floor and how to limit them

The three most common risks of digital signage at events are power failure, content errors and physical damage to the display. Each requires a different approach.

Power failure You avoid this by placing your display on its own circuit, separate from lighting and other equipment. Ask the venue whether residual-current protection of 30 mA is present on your connection — this is required in many situations for temporary installations. Appoint one contact person who is reachable for faults during the event.

Content errors — a wrong resolution, a black screen or a frozen loop — can be solved with a content check protocol. Upload content to the device at least 24 hours before setup day. Test all playlists on the screen itself, not just on a laptop. Make a backup copy on USB.

Physical damage is a contractual risk. When renting equipment, always check the condition of the screen on receipt and photograph any damage. Record this by email to the rental provider before the trade fair begins. For Pixio Display rental orders, the PixioDisplay Mobile (43" touchscreen, 60×150 cm, 400 cd/m²) can be rented from current price on request per day for three days — the day rate rises to current price on request for one-day hire (price list Q2 2026). Damage not reported in advance is usually the renter’s responsibility.

Contractual arrangements: what is often missing?

In the showroom in Montfoort, customers regularly compare quotations from several suppliers. Transport, warranty extensions and content management are surprisingly often missing from them. Those are exactly the three items that make the difference at an event between a flawless trade fair day and an after-the-fact cost item.

Check in every hire or rental agreement at least:

  • Transport and delivery: who delivers, at what time and at which entrance? Courier delivery within the Netherlands costs at Pixio Display from current price on request (price list Q2 2026) — but some halls charge their own entry fees or require a time slot.
  • Warranty and replacement: what happens in the event of a defect during the trade fair? An extension of the warranty to 2 years costs current price on request at Pixio Display depending on the model (price list Q2 2026), but for rental the question is whether the landlord provides a replacement device and within what response time.
  • Content management: who is responsible for loading and updating content? With hire without management service, you are.
  • Liability: is the display insured during transport and during the event? Check whether your own business insurance covers temporarily rented equipment.

When participating via an organiser — as bol.com did at the Negenmaandenbeurs, for which Pixio Display provided the screens — these arrangements are often already set out in the exhibitor packet. If you are organising yourself, you need to ask for them proactively.

Buying or renting: the arithmetic break-even point

The question stand builders ask most often is: buy or rent? The arithmetic break-even point is around 8–10 usage days per year. If you do fewer trade fairs or events, renting is almost always cheaper.

For comparison:

Scenario Purchase price Rental price (3 days) Break-even
PixioDisplay Mobile 43" current price on request current price on request/day = current price on request ~17 trade fair days
PixioDisplay Luxe 49" current price on request current price on request/day = current price on request ~15 trade fair days
PixioKiosk 32" current price on request Rent from current price on request/day ~13 trade fair days

Price list Q2 2026. Break-even calculated on daily rental rate at 3 days; excluding transport and warranty.

All PixioDisplays have an integrated Android computer (Android 13/14). You do not need a separate media player or laptop. You load content via USB, website URL or the PixioApp. That saves not only money (elsewhere current price on request per screen for a separate media player), but also setup time at the stand.

Considering a display without a power point — for example for a stand in a hall with limited electrical connections? The PixioDisplay A-board runs on a battery with an operating time of 14–18 hours and does not need a mains power point. That immediately removes one of the most common technical risks on the trade fair floor.

Inspection protocol: the day before and the day of

A fixed check protocol prevents surprises on build day. Use this order:

Day before the fair (or upon delivery):

  • Check the display for damage and photograph its condition.
  • Upload all content and test the full playlist on the device itself.
  • Check whether the power cable and any extension cable are suitable for temporary use (type H07 for outdoor applications or heavier halls).
  • Confirm the rental company's delivery times and contact person in writing.

On setup day:

  • Connect the display as the last device — after lighting and other equipment — to avoid peak load.
  • Check the earth leakage protection on the hall distribution board.
  • Lay cables directly in cable ducts or cable bridges; loose cables on the floor are not allowed in most halls.
  • Take a photo of the working screen with visible content as proof of correct handover.

During the trade fair:

  • Check the screen at least once a day for frozen content or overheating.
  • Keep the landlord's contact details to hand for immediate escalation.

For broader technical preparation — network, power groups and maintenance — read the article Technical requirements for digital signage: network, power supply, maintenance. If you want to know which displays best suit your stand concept, take a look at the trade fair and event displays or request the current price list at.

Frequently asked questions

Which electrical standards apply to my display at a trade fair?

For temporary electrical installations at events, the Netherlands applies NEN 1010, NEN 3140 and specifically NEN 8020-20 ('Events – Electrical installations'). These standards apply regardless of the duration or size of the event. Also check the hall’s own technical regulations — major venues such as Jaarbeurs or RAI impose additional requirements.

What should I do if my display fails during the trade fair?

Before the trade fair, back up your content to USB and note the direct phone number of your rental company or supplier. First check the power circuit and residual current device. For rental equipment, the hirer is contractually obliged to arrange replacement — ask about the response time in advance and record it in the contract.

How do I know whether a display is bright enough for my stand location?

Inside a standard exhibition hall, 400 cd/m² is sufficient. If your stand is by a glass façade or in a bright entrance hall, choose at least 1.000 nits. Consumer TVs typically reach only about ±300 nits and are not designed for continuous use — always use a commercial display.

Should I hire or buy a display for trade fair participation?

The financial break-even point is around 8–10 usage days per year. If you do fewer trade fairs, renting is almost always cheaper. The PixioDisplay Mobile (43") is available to rent from €105 per day for three days' hire (price list Q2 2026). Buying only becomes worthwhile if you also use the display regularly outside trade fairs.

What should I check contractually when hiring a display for an event?

Check at least: delivery time and location, replacement in case of defect (including response time), who is responsible for content management, and whether the display is insured during transport and use. Photograph the condition of the device on receipt and report any damage to the hire company immediately in writing.

Read also

The full price list

Request the price list brochure

The brochure brings all displays together, with the available purchase, rental and lease prices, versions and options. You will receive the price list by email.

Prefer a different step right away?

We use your data to provide the price list and follow up on your enquiry. You do not need to sign up for updates for this.

We will process your request and follow up by email. A Pixio specialist responds within one working day.