All-in-one touchscreen displays with Android.

Knowledge and advice

LED, LCD or e-ink: which display type do you choose for digital signage?

LED, LCD and e-ink each have different strengths. Compare specs, brightness and energy consumption and choose the right display type for your signage installation.

Three display types side by side: an indoor LCD kiosk, an outdoor LED screen and an e-ink information board in a retail environment

LED, LCD or e-ink: which display type do you choose for digital signage?

The three dominant display technologies in digital signage are LCD (Liquid Crystal Display), direct-view LED and e-ink (electronic paper). LCD is the standard for indoor installations up to around 86 inch: sharp, affordable and widely available. Direct-view LED is scalable without bezels, reaches more than 5.000 nits and is therefore the only choice for large outdoor facades. E-ink consumes virtually no power with static content and is therefore suitable for locations without a fixed power connection. The choice depends on three variables: ambient light, content type and update frequency.

How LCD works — and why it is the standard

An LCD panel controls liquid crystals with electrical voltage. An LED backlight illuminates the panel from behind. That distinguishes LCD from direct-view LED: with LCD, the pixels themselves do not produce light.

LCD is the workhorse of indoor installations. Modern commercial LCD panels with IPS technology achieve viewing angles of up to 178° and support 4K resolution. They are widely applicable: menu boards, information columns, wall displays in shops and receptions.

For normal indoor lighting, 300–400 nits is sufficient. If the screen is close to a shop window or in a bright lobby, you need more. Atriums and lobbies with incoming daylight require 500–700 nits.

The panel determines the extra cost — not the size. Pixio Display supplies the PixioDisplay Window Full Sun with 3.000 nits for shop window screens: single-sided 43–55" from current price on request, double-sided current price on request (price list Q2 2026). A standard indoor model with 400 nits costs considerably less. That price difference is entirely in the panel.

Direct-view LED — when LCD falls short

With direct-view LED, each LED forms a pixel. There is no backlight and no bezel. That makes seamless video walls and large outdoor formats possible.

LED walls achieve 5.000+ nits, which makes them usable outdoors and in large open spaces. The trade-off: lower pixel density at short viewing distances — pixel pitch is decisive here — and significantly higher purchase costs.

The purchase costs in particular are higher than with LCD, especially for smaller projects. And on lower-quality displays, the pixel size can be visible when you are close by. Rule of thumb: allow at least one metre viewing distance per millimetre of pixel pitch.

For fully outdoor installations, Pixio Display supplies the PixioDisplay Outdoor with 3.500 cd/m²: 49" for current price on request and 55" for current price on request (price list Q2 2026). That is an LCD panel with extremely high backlight — not direct-view LED, but suitable for most Dutch outdoor locations where a video wall is not needed.

E-ink — the third technology for low update frequency

E-ink works with charged microparticles in capsules. An electric field shifts the particles to the surface. When displaying an image, the display uses no energy. Only when changing the image is a small amount of power consumed.

Energy consumption is dramatically lower: an e-ink display that refreshes once per day uses less than 1% of the energy of a comparable LCD display. Readability in sunlight is excellent, because e-ink reflects ambient light rather than emitting its own light.

The limitation is equally clear: the refresh rate is slow — typically 1 to 15 seconds for a full page — which means video or animation are not possible. E-ink is therefore suitable for schedules, opening hours, meeting room management and price labels. Not for promotional videos or real-time dashboards.

E-ink is gaining ground in low-power applications: meeting room signs, electronic shelf labels and transport timetables in locations with limited power infrastructure.

Brightness as a decision criterion: a practical framework

Brightness is the most underestimated spec when choosing a display. Too few nits and your content disappears into the ambient light. Too many nits and you pay unnecessarily for the panel and power consumption.

Location Recommended brightness Suitable technology
Office / closed shop space 300–500 nits LCD
Shop space with windows 500–700 nits LCD (commercial)
Shop window (screen behind glass) 1.000–3.000 nits High-bright LCD
Partially covered outdoors (canopy) 2.500–3.000 nits High-bright LCD
Fully outdoors (full sun) 3.500+ nits LCD outdoor / direct-view LED
Static info, no power Not applicable E-ink

A standard 400-nit indoor model disappears as soon as direct sunlight falls on the glass. Outdoor digital signage calls for 2.500–4.000 nits, sealed enclosures and components that can withstand full sun and rain.

Consumer TVs are not an alternative. They are not built for continuous use of 18/7 or 24/7, lack commercial warranty coverage for business use and offer fewer network management options. Pixio Display models run on Android 13/14 with an integrated media player — no separate media player (current price on request per screen elsewhere) or laptop is required.

Choosing technology based on content type

The technology choice follows from what you want to show, not only from where you want to show it.

  • Video and animation: LCD or direct-view LED. E-ink is unsuitable here.
  • Static text, schedules, prices: E-ink or LCD. E-ink wins on power consumption.
  • Interaction (touch): LCD. Touchscreen e-ink does exist, but supply is limited and response is slow.
  • Large seamless surfaces: Direct-view LED.
  • Outdoors without a mains socket: E-ink (battery) or the PixioDisplay A-board on battery (14–18 hours runtime, no power point required, current price on request for 1.500 nits or current price on request for 2.000 nits, price list Q2 2026).

E-ink is not a replacement for LCD — it is a complement. Each technology has a clearly distinct area of application. Start with the question: how often does the content change? If it changes less than once an hour and no power is available, e-ink is the starting point. If the content changes continuously or includes video, LCD is the standard choice, with direct-view LED for large or outdoor formats.

A concrete example: bol.com chose LCD displays on the stand at the Negenmaandenbeurs — an environment with changing light, dynamic content and high visitor frequency. For such an application, e-ink does not deliver the visual impact that a trade fair audience expects.

Conclusion: three technologies, three application profiles

LCD is the standard for indoor installations with dynamic content. Direct-view LED is the choice for large formats, outdoor walls and high brightness requirements. E-ink fills the niche for static information without a mains power point.

Choose LCD if your content changes regularly and the installation is indoors. Choose high-bright LCD or direct-view LED as soon as the screen is outdoors or in a shop window. Choose e-ink only if content changes slowly and power consumption or cable infrastructure is a real constraint.

Want to know which specs and brightness class you need for a specific location? Then also read Technical requirements for digital signage: network, power supply, maintenance or view the full range on the PixioDisplay Outdoor product page.

Frequently asked questions

What is the difference between LED and LCD in digital signage?

With LCD, an LED backlight illuminates the panel from behind; the pixels themselves produce no light. With direct-view LED, each LED forms a separate pixel, without backlight or bezel. LCD is sharper at short viewing distances and cheaper for smaller formats. Direct-view LED scales to large formats and achieves higher brightness for outdoor applications.

When is e-ink a good choice for digital signage?

E-ink is suitable when the content changes infrequently — think schedules, opening hours, meeting room management or price labels — and when no fixed mains connection is available. E-ink only uses power when changing content and can last months to years on battery. For video, animation or real-time content, e-ink is unsuitable because of the slow refresh rate of 1–15 seconds.

How many nits do I need for a shop window screen?

A shop window screen behind glass in direct sunlight requires at least 2.000–3.000 nits. A standard indoor model of 400 nits is unreadable in that environment. Pixio Display offers the PixioDisplay Window Full Sun with 3.000 nits for shop window screens, from €1.780 for 43" (price list Q2 2026).

Can I use a regular consumer TV as a digital signage display?

This is not recommended. Consumer TVs are not built for continuous use of 18/7 or 24/7, lack commercial warranty coverage and do not offer sufficient brightness for most signage environments. Commercial displays are designed for continuous use and usually have an integrated media player, making a separate media player (elsewhere €80–€300 per screen) unnecessary.

What is the best technology for an outdoor display without a power socket?

Without a power point, there are two options: battery-powered e-ink (suitable for static content, months to years on one charge) or a battery-powered LCD pavement sign. The PixioDisplay Pavement Sign from Pixio Display runs on a battery with 14–18 hours of use and does not need a power point. It is available in 1.500 nits for €2.245 or 2.000 nits for €2.950 (price list Q2 2026).

Read also

The full price list

Request the price list brochure

The brochure brings all displays together, with the available purchase, rental and lease prices, versions and options. You will receive the price list by email.

Prefer a different step right away?

We use your data to provide the price list and follow up on your enquiry. You do not need to sign up for updates for this.

We will process your request and follow up by email. A Pixio specialist responds within one working day.