All-in-one touchscreen displays with Android.

Knowledge and advice

IP65, IP66 or IP67: what does the IP rating mean in practical terms for your outdoor display?

IP65, IP66 or IP67 for outdoor signage: learn what the IEC 60529 test figures mean in rain, pressure spraying and coastal locations — and choose the right rating.

Outdoor digital display with IP65 enclosure in heavy rain at a Dutch urban location, water droplets visible on the screen

An IP rating (Ingress Protection) is a two-digit code laid down in the international standard IEC 60529 and indicates how well a housing protects against dust and water. The first digit stands for dust protection (0–6), the second for water protection (0–9K). For outdoor signage, the rule is: IP65 is the absolute minimum for a fully open location, IP66 is required for pressure washing or storm-prone coastal areas, and IP67 is added when temporary submersion is a real possibility.

What the two figures measure specifically

The first digit describes protection against solid particles. A 6 — the highest level — means completely dust-tight: during the IEC 60529 test, the enclosure is placed in a dust chamber with fine talc powder for 8 hours, after which no particles may have entered. For outdoor displays, this figure is almost always 6; dust that lands on the LCD panel or backlight causes hotspots and reduces optical brightness over time.

The second figure describes water protection. This is where the real difference between IP65, IP66 and IP67 lies:

Rating Water test (IEC 60529) Practical meaning
IP65 Water jet, 12,5 L/min, all directions Rain, splashes, garden hose
IP66 Powerful water jet, 100 L/min, all directions Storm rain, pressure washing, sea wind
IP67 Immersion 1 m deep, 30 minutes Flood risk, mounted low at ground level

The jump from 5 to 6 is bigger than it seems: the IP66 test uses a nozzle that passes roughly eight times more water per minute than the IP65 test. An enclosure that achieves IP65 does not necessarily have to pass the IP66 test.

The critical pitfall: IP67 is not a superset of IP66

This is the point most often missed in practice. IP67 does not guarantee protection against water jets, unless the product carries a dual rating such as IP66/IP67. IEC 60529 explicitly states that immersion tests (IPX7/IPX8) and water-jet tests (IPX5/IPX6) are separate test methods that do not automatically include one another.

What does this mean for you as an installer? A display with only IP67 is perfectly capable of withstanding temporary immersion, but may fail in the daily storm rain that hits the enclosure from the side. If in doubt, always check the full test report based on IEC 60529 — not just the datasheet summary.

Also watch out for a second pitfall: some manufacturers state the IP rating only for the front of the screen, while the enclosure and connectors have a lower protection rating. If in doubt, always request the full IEC 60529 test report.

Three Dutch location types and the correct rating

The location determines the minimum requirement. Three common scenarios:

1. City centre, wall-mounted (Amsterdam, Utrecht)
A display at a height of 2,5 metres on a façade receives rain and wind-driven spray. IP65 is sufficient here if the installation is correctly aligned and the connections are sealed. Choose IP66 if the façade is regularly cleaned with a pressure washer.

2. Coastal location or harbour (Scheveningen, IJmuiden, Vlissingen)
Sea wind carries salt spray. Salt accelerates corrosion on seals and connectors. IP66 is the minimum here — the higher water pressure in the test better reflects the force of wind-driven sea spray. Also check whether the enclosure is stainless steel or coated aluminium; the IP rating describes ingress only, not corrosion resistance.

3. Mounted low or in a flood-prone area
A digital pavement sign or a ground-level display in a low-lying polder can come into contact with standing water during heavy rainfall. Here, IP67 (or preferably combined IP66/IP67) is the right choice. The PixioDisplay Outdoor — free-standing or wall-mounted model, 3.500 cd/m² brightness, from current price on request for 49″ (price list Q2 2026) — is designed for permanent outdoor installation and carries the IP specification suited to that environment.

What IP rating does not cover

The IEC 60529 standard describes protection against dust and water only. Three things are explicitly excluded:

  • Temperature: heat and frost resistance are listed separately in the technical datasheet as operating temperature range. For that, read the knowledge base article Outdoor display in winter: frost, condensation and heating.
  • Corrosion: an IP66 enclosure made of untreated steel still rusts in a salt spray environment. Material type and coating are separate specifications.
  • UV resistance: ageing of seals due to sunlight reduces the effective IP protection over time. Check the MTBF data and replacement intervals of the gasket.

A high IP rating also says nothing about brightness. For outdoor use you need at least 2.500–3.500 nits to remain readable in direct sunlight — regardless of the IP class of the display.

How to choose the right rating: three decision questions

Use these questions in order:

  1. Is the location fully open (no canopy)? → Minimum IP65. Under cover, IP54 may suffice.
  2. Will the display be cleaned with a pressure washer, or is it located on a coastal site with sea wind? → Choose IP66 or higher.
  3. Is there a risk of temporary submersion or standing water? → Choose IP67, preferably combined as IP66/IP67.

If you choose a digital pavement sign that you move regularly? The PixioDisplay Pavement Sign (43″, battery-powered, 14–18 hours runtime, 1.500 nits for current price on request or 2.000 nits for current price on request, price list Q2 2026) is intended for semi-outdoor use. For permanent outdoor placement, always check the IP specification in the product datasheet — the IP rating for a battery-powered display may differ from a fixed installation.

Check IP rating: three practical steps

As an installer, you check the IP rating at three moments:

  • For order: request the full IEC 60529 test report, not just the datasheet. Check whether the rating applies to the full enclosure including connections, or only to the front panel.
  • During installation: make sure cable entries and wall mounts do not undermine the display's IP rating. An IP66 display with an open cable duct is in practice not an IP66 installation.
  • After installation: plan an annual inspection of seals and gaskets, especially in salty or UV-intensive environments. Seals age faster than the housing itself.

For a complete overview of all IP classes from IP54 to IP67 — including boundary cases and the selection logic per location type — read the knowledge base article IP54, IP65 or IP67? IP ratings explained.

Frequently asked questions

What is the difference between IP65 and IP66 for an outdoor display?

Both ratings are completely dust-tight (first digit 6). The difference lies in the water test: IP65 is tested with 12,5 litres per minute, IP66 with 100 litres per minute. IP66 therefore withstands powerful high-pressure cleaning and storm-driven rain that IP65 cannot handle.

Is IP67 better than IP66 for an outdoor screen?

Not necessarily. IP67 guarantees protection against temporary immersion up to 1 metres deep, but according to IEC 60529 it is not tested against water jets. A display with only IP67 can fail in heavy rain or pressure washing. If in doubt, choose a combined rating such as IP66/IP67.

May I clean an IP65 display with a pressure washer?

No. IP65 is tested against water jets at normal pressure (12,5 L/min). For pressure washing you need at least IP66. Also check the maximum water pressure in the product datasheet, as manufacturers may specify additional limits.

Does the IP rating say anything about frost resistance or heat?

No. IEC 60529 describes only protection against dust and water. Temperature resistance is listed separately in the technical datasheet as the operating temperature range. Always combine both specifications when selecting an outdoor display.

How do I check whether a display's IP rating is really correct?

Request the full IEC 60529 test report from the manufacturer or supplier. Some manufacturers state the IP rating for the front panel only, while the housing and connections have a lower protection rating. A datasheet claim without a test report is no guarantee.

Read also

The full price list

Request the price list brochure

The brochure brings all displays together, with the available purchase, rental and lease prices, versions and options. You will receive the price list by email.

Prefer a different step right away?

We use your data to provide the price list and follow up on your enquiry. You do not need to sign up for updates for this.

We will process your request and follow up by email. A Pixio specialist responds within one working day.